Search Posts

Cisco command: show (1)

Router#show ip eigrp topology

Router#show ip eigrp topology 
IP-EIGRP Topology Table for AS 100/ID(192.168.1.1)

Codes: P - Passive, A - Active, U - Update, Q - Query, R - Reply,
       r - Reply status

P 10.1.1.0/24, 1 successors, FD is 28160
         via Connected, FastEthernet0/0
P 10.2.2.0/24, 1 successors, FD is 20514560
         via 192.168.1.2 (20514560/28160), Serial1/0
P 192.168.1.0/24, 1 successors, FD is 20512000
         via Connected, Serial1/0

Router#show ip route

Router#show ip route
Codes: C - connected, S - static, I - IGRP, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2, E - EGP
       i - IS-IS, L1 - IS-IS level-1, L2 - IS-IS level-2, ia - IS-IS inter area
       * - candidate default, U - per-user static route, o - ODR
       P - periodic downloaded static route

Gateway of last resort is not set

     10.0.0.0/24 is subnetted, 2 subnets
C       10.1.1.0 is directly connected, FastEthernet0/0
D       10.2.2.0 [90/20514560] via 192.168.1.2, 00:33:55, Serial1/0
C    192.168.1.0/24 is directly connected, Serial1/0

Router#show ip eigrp neighbors

Router#show ip eigrp neighbors 
IP-EIGRP neighbors for process 100
H   Address         Interface      Hold Uptime    SRTT   RTO   Q   Seq
                                   (sec)          (ms)        Cnt  Num
0   192.168.1.2     Se1/0          11   01:27:25  40     1000  0   20

Router#show ip interface brief

Router#show ip eigrp neighbors 
IP-EIGRP neighbors for process 100
H   Address         Interface      Hold Uptime    SRTT   RTO   Q   Seq
                                   (sec)          (ms)        Cnt  Num
0   192.168.1.2     Se1/0          14   01:17:57  40     1000  0   20

OSPF verification commands

show ip ospf neighbor

show ip ospf interface

show ip protocols

show ip route

show ip ospf database